shopelitescreens badge

  mod adv



mod alr 300reward



Elite Screens CEA

Elite Screens CEDIA

Elite Screens InfoComm

 > Insta-DE Series

Instantly transform any wall or window into a white board projection screen: The soft-padded dry erase whiteboard projection screen with VersaWhite 1.1 gain material is the ideal solution for short throw projectors and educational training facilities in need of both a projection screen and a writing surface.


  1. Instant soft-padded dry erase screen - Stick it up, Project & Write
  2. Instantly convert your blank wall space into an educational combination of projection screen and dry erase board
  3. VersaWhite screen material surface is coated with a scratch-resistant optical nanotech resin to enhance the durability as a long term dry erase board
  4. Designed for the meeting room, educational and training facilities
  5. 4K Ultra HD and Active 3D Ready
  6. Available in 63, 84" (4:3), 95" (16:10), 102" (16:9), 4' x 10',4' x 20' and 4' x 30' models
  7. Unique optical coating provides high diffusion uniformity and superior color reproduction
  8. No "glare" effect on projection surface as typically experienced on standard white boards
  9. Wide diffusion 180º viewing angle with 1.1 Gain
  10. Includes markers and erasers
  11. Optional Frame Border & Pen Tray accessory kit available
  12. GREENGUARD® and GREENGUARD® Gold Certified UL 2818
 Click on image to play video
VideoThumb idem VideoThumb USC ide
 Insta-DE Product Video  Insta-DE Video Installed at the Annenberg Innovation Lab - University of Southern California

VideoThumb insta-de ucla
 vid thumb gb196
 Insta-DE Installation Video at UCLA Extension Lab  GeekBeat.TV Unboxing Starling Tension and Insta-DE Series
VideoThumb WB Comp VidThumb cleaning instructions196 
Whiteboard Dry-Erase Projection Screens Comparison WhiteBoard Cleaning Instructions 


Click on any thumbnail for gallery

The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.

Insta-DE Series Dimensions Table

Model NumberNominal Diagonal & Aspect RatioView Height (A)View Width (B)Thickness (C)
iWB4x10HW4'H x 10'W1270.03048.02.1
iWB4x20HW4'H x 20'W1270.06096.02.1
iWB4x30HW4'H x 30'W1270.09144.02.1
Note: Data Error ±1"


Print and Download

Insta-DE with Frame Dimensions Table

Frame Border and Pen Tray for Insta-DE
Model NumberScreen HeightScreen WidthView Height (A)Frame Height (A1)View Width (B)Frame Width (B1)Tray Width (B2)DD1
Note: Data Error be ±1"

ide frame ZFP-IWB

Print/Download PDF

Insta DE Series Packaging Dimensions

Model Number Net Weight W. (lbs.)Gross Weight (lbs.)Net Weight. (Kgs)Gross Weight (Kgs)Packaging Dimensions (LxHxW)


Brochure Download
User Guide Download
White Paper Download
Dimensions Table Download
Insta-DE Series Video Download
Instructions on How to Remove Dry-Erase Markings Download Watch
Material Sheet
GREENGUARD Certificate Download
GREENGUARD Gold Certificate Download


Insta-DE Model Numbers

Model NumberNominal DiagonalAspect RatioView Height (in)View Width (in)View Height (cm)View Width (cm)Screen MaterialGain



Q: How do I properly remove dry-erase markings from my Elite Whiteboard Projection Screens?

A:Before using the dry-erase function of your whiteboard screen, please make note of the following instructions to properly maintain and clean your dry-erase surface projection screen. (These Whiteboard cleaning tips are just as relevant with any dry-erase writing surface as they are with our Whiteboard-Projection Screens.)

1. Only use a high density foam eraser when removing dry-erase markings from the Whiteboard screen.

2. Do not use abrasive erasers as these may scratch the surface of the screen.

3. Never spray the whiteboard cleaner solution onto the surface while marker writing is present and then attempt to use a high density foam eraser to remove. This will only smear the dry-erase marker ink making the surface more difficult to clean and will likely ruin the foam eraser.

4. If there are any dry-erase markings left behind even after attempting to remove them using our high density erasers, spray our whiteboard cleaning solution directly onto the screen surface and use only a soft microfiber cloth to wipe-down and clean the area.

For a video demonstration, please visit:


Q: What type of dry-erase markers do you recommend using on my Elite Screens whiteboard screen product?
A: Elite Screens recommends using our dy-erase markers.  Additional markers can be purchased in a set, part number ZER3Any other regular low-odor dry-erase markers brands such as EXPO are also ok to use.

Q: What is the proper procedure for removing dry-erase marker writing?
A: First, remove the dry-erase writing on the whiteboard surface using our eraser.  If there are any markings left behind, use a whiteboard spray cleaner such as our ZERC2 with a soft micro-fiber cloth to remove any residue.

Note: Never spray whiteboard cleaner on the surface while marker writing is on the surface and attempt to use an eraser to remove.  This will only smear the dry-erase marker ink and ruin the foam eraser.

Q: How does the Insta-DE material attach/stick to the surface I plan to install it on?
A: The Insta-DE includes a double-sided tape which can be self-applied to the backing.

Q: Can I use after-market whiteboard erasers on my Elite whiteboard projection screen?
Elite Screens recommends purchasing the high-density whiteboard erasers from us since the dry-erase projection screen surface is unique and can only be properly erased with our erasers. Elite offers a 2pc. set of our erasers, please click here for more information.

QWill any after-market whiteboard cleaning solution product or whiteboard markers work on my Elite whiteboard projection screen?
A:  After market dry-erase markers/pens and the cleaning solution can be used on Elite's whiteboard projection screens products. We also have a starter kit available for purchase, please click HERE for more details.

Q: Is it normal to see some "hot-spotting"?
A: Yes, it is normal to see slight "hot-spotting" if the viewer is outside of the viewing cone angle.

Q: What is the advantage/disadvantages over the grey surface vs traditional white?
A: There are two versions of Elite’s White board Projection screens. The WhiteBoardScreen is the high-gain grey (Starbright4) version. The WhiteBoardScreen Universal is the matte white (VersaWhite) model. The grey surfaced variant is for presentation environments with high levels of ambient/incident light. It uses our StarBright4 material which has a 4-gain (4x more reflective than matte white.) surface. The purpose for this is that it will provide a bright image even when the lights are on. The advantage of these grey (Starbright4) variants is that it has superior contrast and brightness. The drawback is that the Starbright4 material has a narrow ½ gain cone. In order to be brighter than a standard matte white, the reflected light must be concentrated into an angular reflective “viewing cone”. This means that the reflection will be bright and crisp to those seated directly in front of it. Those seated too far to the side however, will see a milky washed out image or an image with uneven levels of brightness. Although the matte white (VersaWhite, 1.1gain) material is not nearly as bright as the Starbright4, it has wide diffusion uniformity. This means that regardless of any angle one views this screen from, it will always have an equal amount of brightness. This gives the matte white variant an advantage in versatility because the viewers can spread out as opposed to being seated in-line like in a church or public meeting hall. The disadvantage of the matte white is that its image will get washed out by ambient light if there is neither a projector with a strong output (lumens) used and/or limited control over the room’s ambient lighting.

Q: One thing I did notice is that when using dry erase markers, there is a difference on the grey surface opposed to the white?
A: Either screen will fully erase even the residual markings as long as our specialized whiteboard eraser is used. Both versions of the whiteboard screen are surfaced in a scratch-resistant optical nanotech resin that enables them to perform their dual-role. This surface allows either screen to be matte enough for a projected image without hot-spotting, but smooth enough to erase pen strokes. Because of the unique texture in its design, a regular store-bought whiteboard eraser will work but it may not completely clear away the residual markings. However, the grey surface of the Starbright4 material does made difference to readily identify any residual markings over the bright white surface of the “white” WhiteboardScreen Universal.

Q: Hot spot diffusion worked great and we could see a significant difference over a traditional dry erase board.
A: Yes, both screen variants, the high gain WhiteBoardScreen and matte white WhiteBoardScreen Universal use a series of reflective and diffusion layers that are surfaced by Elite’s scratch-resistant optical nanotech resin. This creates a superior image that is free from the kinds of visual artifacts created by projecting directly onto a regular projection screen

Q: What are the model numbers for the Insta-DE Series?

A: Here is a full list of the model numbers in the Insta-DE series: iWB63VW, iWB84VW, iWB95XW, iWB102HW, iWB4x10HW, IWB4X20HW, IWB4X30HW

Q: What is the Insta-DE material made of?
A: VersaWhite material is a combination of scratch resistant layer on top of the diffusion layer backed by adhesive foam.

Q: Does Elite Screens recommend an enhanced specific adhesive and primer for installation of large size Insta-DE and Insta-DE2 Series Screens?

A) In regards to the primer, Elite Screens recommends using PROFESSIONAL R-35 Primer (An example would be:

Elite Screens does provide a standard adhesive powder compound for installing our Insta-DE2 screens. If you would like your  Insta DE2 or large size Insta DE screen to have a professional-grade finish that is flat, durable, and free from imperfections, you may be able to do so by creating a stronger adhesive (Elite Screens strongly recommends hiring a professional wallpaper installer for best results).

Follow the steps below to create an adhesive compound that is stronger than the adhesive provided:

  1. Combine the adhesive powder that is provided by Elite with 27oz of water. Once mixed this should give you about 30z of a liquid glue compound.
  2. Pour 15oz of that adhesive compound into a separate container/bucket.
  3. Add 15oz of Elmer’s All white glue to the 15oz of adhesive compound liquid. Mix until compound is uniform in texture an appearance.
  4. You can now use this new, stronger compound to install the insta-DE / insta-DE2 to your wall.

This method will work for insta DE and Insta-DE2 sizes up to 5'x10'. For sizes larger than 5'x10', you would need to increase the amount proportionately. Examples: 5'x20' would require double the amount of adhesive, 5'x30' triple the amount, etc.

How to order a Insta-DE Screen


Questions and Suggestions

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Invalid Input

captcha  Refresh
Invalid Input

FaLang translation system by Faboba


News image

PicoScreen wins PC Magazine’s 2016 Editor’s Choice Award

News image

EPV PolarStar eFinity ISF Wins 2016 Mark of Excellence Award

News image

VMAX Dual Series Wins TWICE Magazine 2016 Picks Award

News image

Saker Tab-Tensioned Acoustically Transparent UHD Wins SVC Magazine 2015 Top-30 Most Innovative Products Award


News image

2015 Product Guide

News image

2015 Quick Product Guide

right side SizeSelect v2Elite Screens Support

right side starling2 vid