A self-adhesive rear projection screen film with a 2.2 gain: The Insta-RP Screen is a self-adhesive optical rear projection screen film suitable for commercial applications such as store windows, resorts, restaurants and nightclubs. The Insta-RP is the ideal solution for wherever a permanent rear projection display is needed.
Self-adhesive optical rear projection material
Textured PET (Polyethylene terephthalate) with diffusion layer
2.2 gain with 180º wide diffusion uniformity
Minimum throw (lens) ratio of 0.19
Material is easy to clean and maintain
Special custom sizes up to 3,000 meters long available
The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.
Q: Is the Insta-RP fully transparent when the projector is not in use? A: No, the Insta-RP is not transparent, it has a frost color.
Q: Is the Insta-RP (Apparition) material reusable? Can I remove it from one location and use it in another? A: No, the Insta-RP is designed as a one-point application material. Its special adhesive that allows it to stick firmly in its installation converting empty window space into a rear projection screen for as long as the end user wants it to be. Although its removal is relatively easy, the adhesive in the Insta-RP material will be diminished beyond its potency for reuse.
Q: What is the recommended best and safe way to properly remove the Insta-RP backing? A: For best results, we recommend the following steps.
1) Stick a piece of Scotch Magic Tape to both sides of the Insta-RP 2) Grab each of the tap ends and slowly begin to pull them apart to allow the materials to separate from each other.