Moving Announcement



Translate to

Marchés

Gammes de produits

Choisissez votre écran

Industrial Links

Elite Screens AV-iQ

Members Of

Elite Screens CEA

Elite Screens CEDIA

Elite Screens InfoComm

Follow Elite Screens

 





elite screens shop

projection screen paint
FAQ's

Q: I have a 16:9 (HDTV) home theater projector but I'd like to have a presentation that has a 2.35:1 (Cinemascope) aspect ratio on a 2.35:1 projection screen. Do I need an anamorphic lens for this?

A: For the best possible results, an anamorphic lens is recommended.  However, it is possible to get a 2.35:1 screen format as long as you can live with the "black bars" created when a mismatched 16:9 native aspect ratio projecto is set up to fit a wider projection screen format.  It...
More Info

Q6: I notice that the materials on non-tensioned projection screens may curl at the sides while tensioned materials seem to flatter. What causes this curling?

A: Curling is commonly caused when a non-tensioned screen is in a room temperature below 65°F, but will maintain a relative state of flatness between 65-85°F (18.33°C-29.44°C). Curling does not distort the image, but for those interested in reducing side curls, Elite offers “FG” or a fiberglass-backed material that greatly...
More Info

Q8: Will I void my warranty if I cut the power cord on my Evanesce screen to hardwire it?

A:No, you will not void your warranty, but cutting the cord is not necessary. Please see our hardwired connection (direct control) instructions HERE
More Info

Q4: Is the Insta-RP material reusable? Can I remove it from one location and use it in another?

A: No, the Insta-RP is designed as a one-point application material. Its special adhesive that allows it to stick firmly in its installation converting empty window space into a rear projection screen for as long as the end user wants it to be. Although its removal is relatively easy, the...
More Info


Q: I know that all Elite motorized screens include a built-in 5-12 volt trigger RJ45 input port, but what if my projector does not have a 5-12 volt trigger ouput port. How can I take advantage of this feature on my Elite screen and my projetor?

A: Elite Screens offers a wireless Universal 5-12 volt projector accessory (Part# ZU12V) for projectors that do not have a trigger output. Contact your preferred Elite Screens reseller or visit shop.elitescreens.com for information about purchasing this product.

More Info

Q: I have an auditorium that is 100' long. How do I determine the maximum seating distance?

A: The maximum seating distance will depend on the content being displayed. See below for an explanation. Video: The maximum viewing/seating distance cannot exceed 8x the height of the screen viewing area and the minimum seating distance cannot be closer than the width of the screen viewing area. This...
More Info

Q: If I install a Spectrum Motorized Screen into the ceiling, what are my possible methods of controlling it?

A: Since the Spectrum’s Infrared (IR) Sensor is hidden within the ceiling, there are a few options in which to control a ceiling installed Spectrum Screen: IR Eye Extender (ZSP-EYE&12V):  With the need of line of sight, the IR signal will not be sensed by the IR receiver built within...
More Info

Q4: I need to directly control an Elite electric screen. Do you have a hard wire diagram?

A: Yes, please click HERE for a diagram to achieve a direct control (dry contact).

More Info

Q3: How do I adjust the vertical limit of my screen?

A: Please click HERE and select your screen for the adjustment instructions.

More Info

AwardsMore...

News image

Audioholics Award (2008) Kestrel

 News image

2008 District Administration Top 100 Products

Catalogs & GuidesPlus...

News image

2013 Product Guide
News image

2013 Quick Product Guide